> For the complete documentation index, see [llms.txt](https://docs.timeinpixels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.timeinpixels.com/nobe-omniscope/sources/premiere-pro-and-after-effects.md).

# Premiere Pro & After Effects

Connecting OmniScope with Premiere Pro and After Effects

### Built-in plugin (Transmitter)

The Adobe Premiere Pro & After Effects plugin is installed automatically on Windows. On macOS, select **Options / Install plugins…**

<figure><img src="https://565437294-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MFqn5MuayPgQPMZ9pwf%2Fuploads%2Fgit-blob-85f934ce81d2aec657a6191bb20c3f3ea9c3b61d%2F2026-02_install_plugins_macos.jpg?alt=media" alt=""><figcaption><p>Install individual plugins</p></figcaption></figure>

If Premiere Pro / AE is open please restart it to reload the transmitter plugin.

From version **1.11.52**, OmniScope on macOS checks the installed transmitter at startup and warns when it does not match the current OmniScope version — an **Adobe Transmitter update required** notice opens the plugins window, where you can update the plugin with one click. If you prefer to keep the older plugin, tick **Don't ask again** to silence the warning until the next OmniScope update.

Then please go to Preferences / Playback…

![](https://565437294-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MFqn5MuayPgQPMZ9pwf%2F-MG3MrRIiDPptNty3j69%2F-MG3N85mW9TsQjEYDHEN%2Fimage.png?alt=media\&token=f3a7e6d2-72b1-47da-92f5-aa08357fc327)

And make sure Nobe OmniScope Transmitter is enabled:

![](https://565437294-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MFqn5MuayPgQPMZ9pwf%2F-MG3MrRIiDPptNty3j69%2F-MG3NBIWsjE34aMEzLH2%2Fimage.png?alt=media\&token=d09e6a5d-e0cb-42a5-bb79-d6d1d3673d90)

Once the configuration is complete you can now connect from OmniScope selecting Premiere Pro / AE in the Connect to dialog box.

### HLG and PQ monitoring

{% hint style="info" %}
Native HLG support and corrected 32-bit float PQ transmission are new in **1.11.67 beta**. Update both OmniScope and the Adobe transmitter plugin.
{% endhint %}

In OmniScope, open the **Premiere Pro / AE** input settings and select **Signal type > Use HDR (HLG 32-bit float)**. Restart Premiere Pro or After Effects after changing the signal type.

For an HLG test in Premiere Pro:

1. Use media identified as **Rec.2100 HLG**.
2. In **Sequence Settings > Color Management**, select **Direct HLG (HDR)** and confirm the output color space is **Rec.2100 HLG**.
3. Enable **Maximum Bit Depth** in the sequence settings.
4. In **Preferences > Playback**, enable **Mercury Transmit** and **Nobe OmniScope Transmitter**.
5. Connect the **Premiere Pro / AE** input in OmniScope and confirm the input reports **REC2020 HLG**.

Both HDR modes request full-range 32-bit floating-point RGB from Adobe and send it to OmniScope with Rec.2020 primaries and the selected transfer metadata. For PQ, select **Use HDR (PQ ST2084 32-bit float)**, use **Direct PQ (HDR)** with **Rec.2100 PQ** output, and confirm the input reports **REC2020 PQ (ST2084)**. Enable automatic color detection in the OmniScope input settings so the scopes use the received metadata.

Select the transmitter signal type manually to match Premiere's **output color space**. Premiere's working color space can differ from its output color space. Requesting HDR from the transmitter does not bypass sequence output processing: an SDR output setting can compress highlights before they reach OmniScope. Restart the Adobe host after changing the transmitter signal type.

The HLG and PQ paths were verified in Premiere Pro 26.5.3 on macOS. After Effects has not yet been verified with these changes.

### NDI

Alternatively, you can connect to Premiere Pro / After Effects through NDI plugin.

To install the NDI plugin please download:

* [NDI Tools for Windows](https://go.ndi.video/tools-for-windows)
* [NDI Tools for macOS](https://go.ndi.video/tools-for-mac)

When installing, make sure to select Premiere Pro / After Effects plugin.

Now, in the playback tools, please activate NDI output in the Playback Preferences:

<figure><img src="https://565437294-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MFqn5MuayPgQPMZ9pwf%2Fuploads%2Fuaj5xCnIhUfm0t3PWioN%2FCleanShot%202023-11-20%20at%2021.22.09%402x.png?alt=media&amp;token=352ffdb8-53fc-48f9-9234-c087436e1b8a" alt=""><figcaption></figcaption></figure>

Once this setting is enabled, Nobe OmniScope should be able to see its NDI signal as a new source.
