> For the complete documentation index, see [llms.txt](https://docs.timeinpixels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.timeinpixels.com/nobe-omniscope/qc/pse-detection.md).

# PSE Detection

{% hint style="warning" %}
**BETA** - This feature is available in beta releases (1.11.x). Install the beta version from the downloads page to access it.
{% endhint %}

PSE Detection analyzes video for luminance flashes, red flashes, and optional spatial patterns that can trigger photosensitive epilepsy. Findings appear in the QC panel and timeline and can be exported as JSON or HTML reports.

## Enable PSE Detection

1. Open the **QC** panel.
2. Enable **PSE Detection**.
3. Select the required standard: **ITU-R BT.1702-3**, **Ofcom**, or **NHK/JBA**.
4. Enable **Pattern detection** when spatial-pattern analysis is required. This option is off by default and adds an extra GPU analysis pass.

OmniScope analyzes every processed frame over a sliding time window. Motion estimation helps distinguish image motion from flashing.

## Thresholds

| Setting             | Description                                 | Default  |
| ------------------- | ------------------------------------------- | -------- |
| Flash frequency     | Flash rate used by the selected standard    | 3 Hz     |
| Luminance threshold | Minimum luminance change counted as a flash | 20 cd/m² |
| Screen coverage     | Minimum affected screen area                | 25%      |

Select **Reset to default thresholds** to restore these three values. The selected standard, transfer function, and other PSE settings are not changed.

Changing thresholds or the display model clears the current temporal history, so frames analyzed with different settings are not combined into one result.

## Ofcom Profile

The Ofcom profile follows the 2005 guidance for luminance flashes:

* A luminance flash requires the darker state to be below **160 cd/m²**.
* SDR analysis uses a **2.2 gamma** and **200 cd/m² reference white**.
* The coverage rule is **more than 25%** of the screen.
* Red-flash analysis remains independent of the 160 cd/m² luminance restriction.

These values are included in exported PSE reports.

## Results and Reports

The QC panel shows the current risk level together with measured flash frequency, luminance difference, and screen coverage. In the 1.11.65 beta and later, **Current Frame Analysis** keeps its values until the input timecode changes, which makes frame-by-frame review easier while the source is paused or being stepped. Errors and warnings are also recorded on the [QC Timeline](https://docs.timeinpixels.com/nobe-omniscope/qc/qc-timeline.md).

PSE reports are available in JSON and HTML. Reports include the selected standard, thresholds, event categories, frame ranges, timecodes, peak measurements, and the overall compliance result.

## Related QC Tools

* [QC Timeline](https://docs.timeinpixels.com/nobe-omniscope/qc/qc-timeline.md)
* [Luminosity Limit](https://docs.timeinpixels.com/nobe-omniscope/qc/luminosity-limit.md)
